Monster Power PROAVS2000 Owner's Manual download pdf (Page 15)

TROUBLESHOOTING

PROBLEM – The AVS

2000

PRO is not receiving power.

Possible Cause #1

The AVS

2000

PRO is not turned on.

Possible Solution:

• Make sure the AVS

2000

PRO’s AC power plug is plugged into a properly grounded

120V wall outlet.

• Press the ON button on the AVS

2000

PRO.

Possible Cause #2

Too many devices are connected, causing an overload, tripping the thermal circuit breaker.

NOTE: The total power consumption on all the components powered by a single AVS

2000

PRO

should not exceed 1440 watts continuous or 1800 watts peak for long periods of time.

Possible Solution

• Disconnect any component that maybe overloading the AVS

2000

PRO.

• Press the AVS

2000

PRO’s thermal circuit breaker (labeled BREAKER 15A on the back panel)

button in to reset. Please allow 10 minutes from the time the circuit breaker is initially tripped

before attempting to reset. If you reset too soon, the breaker will prematurely sense

power overload and not allow the unit to operate.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Monster Power PROAVS2000 Owner's Manual Page 15